Trailer brake controllers/U.P. Trailer and Hitch Marquette

Brake controllers are such an integral part of every tow system it pays to have the best - Tekonsha!

Tekonsha is the leader in proportional brake controllers and we carry the full line.

Proportional based controls offer a smooth braking response to almost any stop. Through the use of a sensing device, the brake control can determine the tow vehicle's rate of deceleration and then apply the trailer brakes to match. In other words, Proportional controls deliver power to the trailer brakes in direct relationship to the actual physical deceleration of the tow vehicle.

The Prodigy P2 - our most popular brake controller!

Introducing the Prodigy RF

Wireless, Radio Frequency Transmission for Portability

The Prodigy RF is perfect for anyone who has multiple tow vehicles. There's no hardwiring necessary. Just plug the 7-way lead on the control module into your vehicle's 7-way connector and plug the 7-way on your trailer into the port at the rear of the RF so that the braking signal can be transmitted from your vehicle to your trailer. Then plug the remote into your vehicle's standard 12-volt accessory outlet and use it to control the module wirelessly.

Because you don't have to wire the Prodigy RF to your vehicle, the trailer that you mount the module to can be easily shared among multiple tow vehicles. As long as your vehicle has a 7-way connector, you can use the Prodigy RF. This system is also compatible with vehicles that have multiplex wiring systems precisely because it does not wire into your vehicle.

Tekonsha Brake Controller - 90195

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.

Features:

Brake controller activates trailer brakes in proportion to your vehicle's braking action
Automatically adjusts trailer's braking based on deceleration of tow vehicle
Activates immediately - no pausing like with time-delayed brake controllers
Automatic-leveling ability - internal sensor detects deceleration even if controller is not mounted flat
Position at any angle up or down in the vertical plane
5 Storable settings let you customize controller for multiple trailers, varying loads or different drivers
Store display settings, brake type, language preferences, and desired boost level and power levels
3 Boost levels let you adjust initial braking power and aggressiveness
Continuous diagnostic check alerts you to any potential problems
Integrated safeguards protect your vehicle, trailer and the controller
Minimizes drain on car battery by drawing only 3.6 milliamps when not in use
Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
Defends brake controller and trailer breakaway systems against shorts
Customizable, easy-to-read LCD display lets you choose color, adjust contrast and pick from different languages
Built-in, rotary-style manual override lever
Quick-disconnect feature lets you easily remove and store the control when not in use
Replacement wiring harness (sold separately) and replacement bracket (TK5906- sold separately) required to move the controller from one vehicle to another
Plug-in, vehicle-specific brake-control adapter (sold separately) can be used for certain applications to reduce installation time

Specs:

Application: trailers with up to 4 axles (8 brake assemblies)
Designed for use with electric or electric-over-hydraulic trailer brakes
Overall dimensions: 3-5/8" wide x 4-5/8" long x 1-3/8" tall
LCD display dimensions: 1-3/16" wide x 9/16" tall
Mounting: 360-degree vertical plane operating range
Limited lifetime warranty